ShadowCuff General Specifications

ShadowCuff General Specifications

ShadowCuff Specifications

The ShadowCuff consists of two primary components:
  1. BRM Side: Handles communication and data transmission
  2. BRX Side: Houses the main battery, providing power to the device.

BRM Specifications

  1. GNSS Support: GPS, Galileo, Glonass, and BeiDou
  2. Location Methods: WiFi and Cellular locating
  3. Locating/Transmitting: 30-second locating with 1-minute transmitting intervals. Location Frequency Intervals range from 30 seconds to 5 minutes, allowing the user to choose how often location is obtained.
  4. Data Communication: Utilizes multiple 4G GSM networks
  5. Offline Storage: 30-day offline storage with auto-sync upon reconnection
    1. Stored location points are plotted using a first-in, first-out (FIFO) method
  6. Alerts:
    1. Vibration alerts for low battery, zone violations, and officer-initiated commands
    2. Real-time audio alerts sent through software

BRX Specifications

  1. Battery Life: Up to 84 hours on a full charge
  2. Backup Battery: Activates automatically when the main battery is depleted, lasting 4 - 6 hours at 30 sec tracking/2 min plotting intervals.

Combined Specifications

  1. Durability: IP68 rated, waterproof up to 16.4 feet
  2. Design: Strapless with tool-free installation and less than 20-second setup time
  3. Removal Methods: Dual removal via Security Key and software command
  4. Operating Temperature: 5°F to 131°F (-15°C to 55°C)

    • Related Articles

    • ShadowCuff Location Tracking

      ShadowCuff Location Tracking ShadowCuff uses a combination of GPS, WiFi and LBS data for location tracking The tracking priority is GPS > WiFi > LBS Location points are configurable from 30 seconds to 5 minutes All location data is recorded within ...

    • Configuring Location Frequency for ShadowCuff

      The ShadowCuff offers various location frequency options to cater to different monitoring needs. This guide will walk you through the steps to configure the location frequency of your ShadowCuff and explain the available frequency options. Available ...

    • ShadowCuff Installation

      Prerequisites Unlock the ShadowCuff before installation. You will need an officer key to unlock it, if you do not have an officer key, ensure you have the required permissions to access remote unlock. Installation Orient the ShadowCuff Hold the ...

    • Unlocking ShadowCuff

      Unlocking the ShadowCuff can be done using two different methods: An Officer Key or a Software Command. Unlocking Methods Officer Key An Officer Key can be clipped onto the ShadowCuff to manually unlock the device. This Officer Key clips onto the ...

    • ShadowCuff Vibrations and LEDs

      ShadowCuff has the ability to vibrate alerting the enrollee that the battery has reached a critical level. A command can also be manually sent to the ShadowCuff device via the ShadowtrackONE platform. Also, three lights can be seen on the device ...