ShadowCuff Installation

ShadowCuff Installation

Prerequisites

Unlock the ShadowCuff before installation. You will need an officer key to unlock it, if you do not have an officer key, ensure you have the required permissions to access remote unlock.

Installation

  1. Orient the ShadowCuff 
    1. Hold the ShadowCuff upright, aligning it so the charging connection area faces you with the single circle at the top and the two circles at the bottom.
    2. If the ShadowCuff is oriented incorrectly, it will not lock. A blinking red light will appear, indicating that the ShadowCuff is upside down or oriented incorrectly.
  2. Align the Hinges
    1. Slide the hinges together, ensuring they fit properly into the grooves. The hinges only fit in one direction.
  3. Close the ShadowCuff
    1. Hold the ShadowCuff closed until the second green light in the center, accompanied by an audio confirmation that the cuff is locked.
      1. To ensure the ShadowCuff is properly oriented, make sure the first green light is at the top of the cuff. If the light is at the bottom, the cuff is upside down and will not lock.
  4. Complete Setup
    1. Keep the ShadowCuff still and level as it finalizes the setup. When the third green light appears, the installation is complete.
    2. Position the Comfort Element below the ShadowCuff, wrap it securely around the ankle, and fasten it with the Velcro strap.

Demonstration


This is also used to put the cuff back together. 

    • Related Articles

    • ShadowCuff Location Tracking

      ShadowCuff Location Tracking ShadowCuff uses a combination of GPS, WiFi and LBS data for location tracking The tracking priority is GPS > WiFi > LBS Location points are configurable from 30 seconds to 5 minutes All location data is recorded within ...

    • ShadowCuff Vibrations and LEDs

      ShadowCuff has the ability to vibrate alerting the enrollee that the battery has reached a critical level. A command can also be manually sent to the ShadowCuff device via the ShadowtrackONE platform. Also, three lights can be seen on the device ...

    • Configuring Location Frequency for ShadowCuff

      The ShadowCuff offers various location frequency options to cater to different monitoring needs. This guide will walk you through the steps to configure the location frequency of your ShadowCuff and explain the available frequency options. Available ...

    • ShadowCuff General Specifications

      ShadowCuff Specifications The ShadowCuff consists of two primary components: BRM Side: Handles communication and data transmission BRX Side: Houses the main battery, providing power to the device. BRM Specifications GNSS Support: GPS, Galileo, ...

    • ShadowCuff Alarm Types

      ShadowCuff Alarm Types: A Comprehensive Guide These alarms are categorized into Battery Alarms, Zone Alarms, Communication Alarms, Tamper Alarms, and Other Alarms. Each category serves a specific purpose, alerting users to potential issues or ...