Interior Tracking Alarms

Interior Tracking Alarms

Interior Tracking Alarm Types: A Comprehensive Guide

These alarms are categorized into Battery Alarms, Zone Alarms, Communication Alarms, Tamper Alarms, and Other Alarms for the ShadowTether. Each category serves a specific purpose, alerting users to potential issues or dangers. This guide provides an overview of each alarm type, their trigger conditions, and suggested actions to take.

Battery Alarms

1. Battery Critical

  1. Trigger Condition: Activated when the battery level drops to 10%.
  2. Suggested Action: Charge the device immediately to ensure continuous monitoring.

2. Failed To Charge

  1. Trigger Condition: Occurs when the battery has fully depleted.
  2. Suggested Action: Check the charging setup and reconnect the device to a power source.

Zone Alarms

3. Within Exclusion Zone

  1. Trigger Condition: The enrollee enters a predefined area they are restricted from.
  2. Suggested Action: Verify the inmate's location and ensure they leave the exclusion zone promptly. 

4. Outside Inclusion Zone

  1. Trigger Condition: The enrollee exits an area they are required to stay within.
  2. Suggested Action: Contact the inmate to return to the inclusion zone or assess the need for intervention. 

Communication Alarms

5. Device Communication Timeout

  1. Trigger Condition: No communication from the device has been received for 10 minutes
    1. Note - This can be configured to the desired amount of time.
  2. Suggested Action: Check the device's connectivity and ensure it is within range for optimal operation.

6. Device Communication Timeout Escalated

  1. Trigger Condition: No communication from the device has been received for 20 minutes.
    1. Note - This can be configured to the desired amount of time.
  2. Suggested Action: Escalate the concern for potential technical issues or verify the inmate's safety.

Tamper Alarms

7. Band Tamper

  1. Trigger Condition: The device has been tampered with or disconnected.
  2. Suggested Action: Check the device for any signs of tampering and secure it back on the inmate.

Temperature Alarms

8. Temperature Alarm

  1. Trigger Condition: The temperature sensor is below 25 degrees Celsius
  2. Suggestion Action: Ensure the device was not slipped off, or the inmate is alive.
Info
This manual article aims to provide a clear understanding of various device alarms. Each section outlines the critical alarms, their significance, and the recommended actions to address them effectively. Remember, the primary goal of these alarms is to ensure the safety and monitoring of individuals, requiring timely and appropriate responses to each alert.

    • Related Articles

    • Interior Map

      The interior map displays the floor plan and allows you to monitor inmate movement throughout the facility. Navigate to the 'Profiles' tab in the navigational menu Select 'Inmate' Select 'Interior Map' Interior Map Tab Select the desired floor plan ...

    • Enabling/Disabling Interior Tracking for a User

      Interior Tacking must be enabled by the Shadowtrack team. Please contact us at support@shadowtrack.com to request this feature to be enabled. Once enabled at the entity level, it will automatically enable for all users. Navigate to the user's profile ...

    • ShadowCuff Location Tracking

      ShadowCuff Location Tracking ShadowCuff uses a combination of GPS, WiFi and LBS data for location tracking The tracking priority is GPS > WiFi > LBS Location points are configurable from 30 seconds to 5 minutes All location data is recorded within ...

    • Understanding ShadoWatch Tracking Methods

      ShadoWatch Tracking Methods ShadoWatch employs multiple tracking methods to ensure accurate and reliable location data. This article explains how ShadoWatch tracks via GPS, Wi-Fi, Location-Based Services (LBS), and Bluetooth, along with the details ...

    • Reviewing Tracking Data for Hardware

      Reviewing Tracking History In order to review tracking data for a specific enrollee: Search for the Enrollee by Name Go to the Locations > History tab The location history tab shows "Today" by default for hardware showing the last 20 location points ...